.. _macos_upload:

MacOS/Linux Firmware Upload
============================

1. Download the code to your local machine

.. figure:: img/macos0.png
   :align: center

2. We have stored the bin files in the Firmware folder

.. figure:: img/macos1.png
   :align: center

3. We need to prepare a Type-C to USB-A data cable to connect your Mac computer and the development board

4. You only need to use Chrome or Edge browser to open this website https://espressif.github.io/esp-launchpad/

.. image:: img/mac1.png

5. Click the Connect button at the top, and a window will pop up on the left side to select your device and connect

.. image:: img/mac2.png

6. After the connection is complete, you can see that the Connect button changes to Disconnect, indicating successful connection. We click the DIY button

.. image:: img/mac3.png

7. Fill in 0 in the Flash Address field, and select Firmware in the Selected File section

.. image:: img/mac4.png

.. image:: img/mac5.png

8. After selection is complete, click the Program button to start flashing

.. image:: img/mac5-1.png

.. image:: img/mac6.png

9. After flashing is complete, click the Reset Device button in the upper right corner to restart the device, and you will see the screen display normally

.. image:: img/mac7.png

.. image:: img/mac8.png